Just a quick how-to on taking apart the EDIS ignition module connectors. This is a must if you want a seamless wiring harness or if your pins are failing. This guide applies to all EDIS4, EDIS6, and EDIS8 connectors.
-
- EDIS6 Connector
-
- Screwdriver
-
- Remove Retaining Clip
-
- More prying
-
- Remove Clip
-
- Seal Removal
-
- Pry Out Seal
-
- Pin Retainer
-
- Pin Retainer Again
-
- Retainer Removed
-
- Pin Removal
-
- Pin Help
-
- Extracted Pin
I have the EDIS/Megajolt Jr setup. However only two cylinders are firing. Any ideas. PLease email me.