Miller's Mule Technical Pages

Here I have some files consisting of part drawings etc... you can right click your mouse and hit "save target as" to save the file on your drive. I provide this data as a free service to all the fellow enthusiasts out there. These drawings are property of Miller's Mule. Do not claim them as your own. If you need any dimensions, let me know, I probably have them and will post them here.

	BMW S14 Flywheel	Drawing of an aluminum S14 flywheel. Contains dimensions on the friction surface and bolt pattern, which are the same as the stock part.
	Fiat DOHC Flywheel Bolt Pattern	The bolt pattern for Fiat DOHC flywheels/crankshafts. 12mm holes come on the late 1756 engines and 1995 engines. 10mm on the 1592, 1608, and early 1756. All crankshafts have the 10mm dowel pin holes.
	Fiat DOHC Flywheel Comparison	Comparison drawing of a few Fiat flywheels and their respective weights/MOI's.
	Fiat DOHC Transmission to Block Mounting	Bolt hole dimensions for transmission mounting. Useful for making adapter plates. Dimensions on this drawing are weird, multiply by 2 to have the proper ones.
	EDIS Sensor Setup Guide	Quick guide to setting up our EDIS Sensor.
	Fiat 124 OEM Brake Rotor	Brembo brake rotor dimensions for the Fiat 124
	MG TD Flywheel Lightening	These are the cross sections of the flywheels before and after lightening, along with respective weights and MOIs.
	Fiat 1608 Crankshaft	Model drawn in Inventor 10.
	Fiat Arkon Guibo	Arkon brand guibo for the Fiat 124. Useful to get dimensions for guibo swaps. Modeled in Inventor 10
	Fiat 124 Brake Rotor	Modeled in Inventor 10
	Fiat 124 Front Hub	This drawing provides all the necessary dimensions to make wheel spacers or wheel adapters.

Home