EDIS Parts
We stock everything you need to go distributorless! We have experience with a wide variety of engine management systems, from Megasquirt, Megajolt, Electromotive, Motec, Haltech and more! Why buy your EDIS parts from anywhere else? Save on shipping at our one stop shop!
| Part# | Description | Price |
|---|---|---|
| 60-2 Trigger Wheel | $40 |
|
 |
Precision cut to work with Motec, Electromotive, Motronic etc.. 5" and 6" readily in stock but can be made to any size. We can also mount the trigger wheel to your crank pulley for an additional fee.
|
In Stock |
| 36-1 Trigger Wheel | $25 |
|
 |
Precision cut to work with the Ford EDIS systems. Available in any diameter. We can also mount the trigger wheel to your crank pulley for an additional fee.
|
In Stock |
| Coil Pack 4cyl with Straight Plugs | $50 |
|
 |
Works with the ford EDIS4 and EDIS8 systems. This plug typically works better for retrofits because you do not have to change plug wires! Also has a flat bottom which is much easier to mount than the "clip-on" types of coils.
|
In Stock |
| Accel Super Coil Pack 4cyl with Straight Plugs | $75 |
|
 |
Works with the ford EDIS4 and EDIS8 systems. This plug typically works better for retrofits because you do not have to change plug wires!
|
Special Order |
| Coil Pack 4cyl with Clip-on Plugs | $80 |
|
 |
Works with the ford EDIS4 and EDIS8 systems. Also available used. |
In Stock |
| Coil Pack 6cyl with Clip-on Plugs | $90 |
|
 |
Works with the ford EDIS6 systems. Also available used. |
In Stock |
| Accel Super Coil Pack 4cyl with Clip-on Plugs | $75 |
|
 |
Works with the ford EDIS4 and EDIS8 systems.
|
Special Order |
| Accel Super Coil Pack 6cyl with Clip-on Plugs | $95 |
|
 |
Works with the ford EDIS6 systems.
|
Special Order |
| Megajolt | $165 |
|
 |
Fully programmable ignition controller. Can be setup for either MAP or TPS signal. More information at: http://www.autosportlabs.com/
|
In Stock |
| 4cyl Coil Pack Pigtail Connector | $35 |
|
 |
Works with all 4cyl coil packs we sell. Used junkyard items are almost always broken, these are new with fresh rubber and plastic. This part is offered at our cost, unfortunately we have not been able to find it cheaper. We can also source the 6 cylinder connectors.
|
In Stock |
| EDIS4 Module w/Pigtail Connector (Used) | $40 |
|
 |
For use in 4 cylinder distributorless ignition setups. Also available new. |
In Stock |
EDIS6 Module w/Pigtail Connector (Used) |
$40 |
|
For use in 6 cylinder and 12 cylinder distributorless ignition setups. Also available new.
|
In Stock |
|
| EDIS8 Module w/Pigtail Connector | $40 |
|
For use in 8 cylinder distributorless ignition setups. Also available new.
|
Special Order |
|
| Crank Sensor w/8ft Shielded Cable | $40 |
|
 |
Millersmule crank sensor. Can be used with many systems including Megajolt, Megasquirt, Wolf 3D. We can also provide specialty sensors if necessary.
|
In Stock |
| Sensor Mount | ||
 |
We have sensor mounts to work with most Fiat applications. We can work with any engine to make a custom sensor mount for you.
|
Inquire |
| EDIS Coil Mount | ||
 |
Coil mounts for the old style coil packs without flat bottoms.
|
Special Order |
Distributor Hole Plug |
||
We stock hole plugs for Fiats, Alfa Romeos and early 4 and 6 cylinder BMW's. We are a full service machine shop and can design and manufacture a part for your specific application.
|
Inquire |
|
| Trigger Wheel Mounting | ||
 |
We specialize in crank trigger setups for ANY car. | Inquire |